Articulators And Accessories

<p><strong>B672 3-Jaw Chuck</strong></p><p><br /> Work piece can be mounted by griping inside or outside circumference. The chuck will mount on any polishing lathe with standard jeweler's taper shaft.</p><p>&nbsp;</p><p><strong>INSTRUCTIONS FOR MOUNTING B672 3-JAW CHUCK ON TAPER SHAFT</strong></p><p>​If you typically clamp parts externally by inserting the part into the middle of the jaws and securing, it is recommended that you mount the chuck on the right side of the polishing lathe. If you usually clamp parts internally by placing the part on the face of the chuck and spreading the jaws until they come in contact with the internal periphery, it is best to mount the chuck on the left side of the lathe. The chuck is designed for mounting on Ray Foster Variable Speed Polishing Lathe, item PR90, as you can control the speed to no more than the recommended 1,500 maximum RPM. If you mount on a 2-speed polishing lathe operate on low speed ONLY. To mount the chuck, wipe the taper shaft clean. Slide the chuck onto the shaft as far as possible and seat with a soft faced mallet. A couple of firm taps should do it. Test run the lathe not to exceed 1,500 RPM maximum. Stop the lathe and make sure the chuck is secure before using.&nbsp;</p>

<p>New Product!! Disposable Plastic Articulator - Black Slotted 100 Sets Per Bag Made in USA</p>

<p><h1>Paratherm – Surveying, Blocking-Out And Waxing Unit, 110/230/240 V</h1><br /><p><h2> - Units: 1 piece</h2></p><strong>Advantages:</strong><ul><li>flexible measuring movement with linearly guided sliding bars</li><li>horizontal swiveling range of the two arms over the entire working area</li><li>separate measuring and thermal blocking-out rods, vertically spring adjustable. All positions can be fixed in place</li><li>secure lockings</li><li>thermal temperature can be regulated up to 140 °C / 284 °F</li><li>replaceable tips</li><li>heavy, rigid construction</li><li>instrument storage holder</li><li>connection for electric wax knife and holder (Potentiometer and socket)</li></ul><strong>Contents of delivery:</strong><br /><ul><li>1 Paratherm with surveying and blocking-out arm</li><li>1 analyzing rod </li><li>1 graphite holder </li><li>10 replacement graphite markers (Graphite, REF 094-289-00)</li><li>4 undercut gauges 0.25 mm , 0.35 mm , 0.5 mm , 0.75 mm </li><li>2 thermal blocking-out instruments 0° , 2° </li><li>1 plastic cover</li><li>1 fuse</li></ul><strong>Please order model table and wax knife separately.</strong><table><tr><td>Power voltage</td><td>110/230/240 V~ </td></tr></p>

<p><strong>Three Dimensional Bow Divider Acc. To Korkhaus</strong></p><p>&nbsp;</p><p><strong>- Units: 1 piece</strong></p><p>&nbsp;</p><p>Allows the direction and extent of tooth movement to be checked by a single measurement on the model. Not approved for intra-oral use!</p><p>&nbsp;</p><table> <tbody> <tr> <td>acc. to</td> <td>Korkhaus</td> </tr> </tbody> </table>